Bosch Appliances REG-D1 installation instructions Initial Preparations, Guidelines

INITIAL PREPARATIONS

•Determine the operating voltage at the installation site. The camera‘s Voltage Regulator Board accepts both 12-24VDC/VAC input without change to internal connections.

See Section 2, Input Power Connections.

•Determine the optimum location for the camera. See Section 3, Mounting Specification.

•All cameras have been tested prior to shipment. After the wiring has been reconnected, it is advisable to check the camera’s operation before installation.

GUIDELINES

The installation of the REG-D1camera is explained in Sections 1 to 3.

It is important that these steps are followed and to practice proper installation procedures with proper safety equipment.

- 3 -