Care and Maintenance, Starting the dishwasher

Activating a Dishwasher Option

To activate any of the Dishwasher Options listed, follow these steps:

1.Open the dishwasher door far enough to expose the control panel.

2.Press the On/Off button.

3.Press the MENU/OK button until the desired option appears in the display window.

4.Press the - or + button to step through the available option settings.

5.When the desired setting is shown in the display window, press the MENU/OK button to save the setting. The display will indicate “Value Stored” and return to the main menu. If you did not change the setting, press the start button to return to the main menu.

6.Select the desired wash cycle by pressing the - or + buttons.

7.Press the start button and close the dishwasher door to begin the cycle.

NOTE: In the Options Step Down Menu, you can return to the main menu at any time by pressing the START button.

Starting the dishwasher

When the correct cycle and options are shown in the display window and you have added detergent and rinse aid as explained in the Adding Detergent and Rinse Aid section of this manual, press the START button and close the door.

After pressing the START button, the display will show the following information:

•Close the door.

•Estimated completion time (this automatically adjusts throughout the cycle based on incoming water temperature and selected options).

•Current cycle name.

•“Return” (allows you to choose another cycle).

Unloading the Dishwasher

Unload the bottom rack first.

Unload the silverware basket(s). They are easily removed for unloading. Unload the top rack.

If the Extra Tall Item Sprinkler was installed, return the dishwasher to its normal condition (see the Loading Extra Tall Items instructions in the “Loading the Dishwasher” section of this manual).