Bosch Appliances UML-193-90, UML-223-90 Connecting Power, Connecting Audio to the Monitor

Bosch HD LCD Monitors Installing the Monitor en 23

2.Position the monitor:

a.The viewing angle of the LCD can be adjusted to fit the most comfortable viewing position. (Tilt Range: - 3°~15°)

-3˚ 15˚

5.3Connecting Power

The Bosch Flat Panel CCTV monitors are delivered with a 3-pole US-style power cord and a 3-pole Euro-style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; use the Euro-style power cord where 230 VAC, 50 Hz power is available. The monitor automatically adjusts to either power input voltage.

5.4Connecting Audio to the Monitor

There is one (1) set of stereo audio connectors for audio input, located on the rear panel. This audio input is not associated with any input terminals on the rear panel, and can be freely connected to any audio input.

5.5Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor: HDMI, DVI, and VGA.

Bosch Security Systems, Inc. User's Manual F.01U.272.027 1.0 2012.08