Bosch Power Tools 11524 manual Charging Battery Pack

BM 1619929562 10/03 10/2/03 3:01 PM Page 10

FIG. 4

LOCKING

LATCHES

CHARGING BATTERY PACK

FIG. 5

LOCKING LATCHES

Plug charger cord into your standard power outlet. Before inserting battery pack, remove protective cap (Fig. 6), then insert battery pack into charger (Fig. 7).

The charger’s green indicator light will begin to “BLINK”. This indicates that the battery is receiving a fast charge. Fast-charging will automatically stop when the battery pack is fully charged.

When the indicator light stops “BLINKING” (and becomes a steady green light) fast charging is complete, and an acoustical signal sounds for a period of approximately 2 seconds which indicates that the battery is completely charged.

The battery pack may be used even though the light may still be blinking. The light may require more time to stop blinking depending on temperature.

The purpose of the green light is to indicate that the battery pack is fast-charging. It does not indicate the exact point of full charge. The light will stop blinking in less time if the battery pack was not completely discharged.

When charging several batteries in sequence, the charge time may slightly increase.

When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) and slip the battery pack back into the tool.

To prevent fire or injury when batteries are not in tool or charger, always place protective cap onto end of battery pack (Fig. 6).

FIG. 6	FIG. 7
	BATTERY
PROTECTIVE	PACK
CAP

CHARGER

RED

LIGHT

GREEN

LIGHT

-10-