BM 1609929C59 06-10 :BM 1609929C59 06/10 6/24/10 8:10 AM Page 9
Assembly
!WARNING To prevent serious personal injury, always disconnect the
plug from power source before changing wheels, or making any adjustments.
INSTALLING ABRASIVE WHEELS
Always use the arbor nut that has same thread size as spindle.
1.Install inner flange onto spindle, with recess in back side of flange engaging matching area on spindle.
2.Install abrasive wheel onto spindle.
3.Install outer flange with flat side out.
4.Thread arbor nut provided onto spindle finger tight, depress spindle lock and tighten wheel with the wrench provided.
! | WARNING |
| Do not overtighten. Cracks in | ||
|
|
|
| the wheel can occur if | |
overtightened. | |||||
|
| ||||
|
|
| Do not depress spindle lock | ||
| ! | CAUTION |
| ||
|
|
|
| while the tool is running. | |
|
|
|
| ||
Operating Instructions
!WARNING Always use wheel guard, foot plate and auxiliary
handle with this abrasive cut off machine.
PADDLE SWITCH
WITH "LOCK-OFF" FEATURE
The Paddle Switch enables the operator to control switch functions of
TO UNLOCK SWITCH AND TURN TOOL "ON": Push the paddle lever FORWARD (toward the spindle) then squeeze the paddle lever.
TO SWITCH TOOL "OFF": Release pressure on the paddle lever. The switch is spring loaded and will return to "OFF" position automatically.
SIDE HANDLE
The side handle, used to guide and balance the tool can be bolted to either side of the spindle housing depending on personal preference and comfort. Always use the side handle for maximum control and ease of operation.
ADJUSTING DEPTH OF CUT
Loosen wing nuts, raise or lower foot plate to desired depth, and securely tighten wing nuts by hand.
!WARNING To prevent recoil and damage to the tool, always
adjust the foot plate to a depth of so the inner or outer flanges never contacts the workpiece surface.
1
0
PADDLE
SWITCH
WING | FOOT | WING |
NUT | PLATE | NUT |
