ADJUSTING THE ANGLE INDICATOR
If necessary, the position of the angle indicator can be
Loosen the screws on the underside of the miter table attachment (approx. 1/2 turn). Also loosen the preset angle release button and locking screw if necessary. Align the saw blade of the mounted saw with the aid of a protractor or square to achieve the 0º setting. Tighten the thumbscrew to secure setting, then securely tighten the screws on the underside of the table attachment (Fig. 11).
FIG. 11 | ANGLE | |
INDICATOR | ||
| ||
| ADJUSTMENT | |
| SCREWS |
LOCKING
SCREW
ALIGNING SAW BLADE 90º
TO THE MITER TABLE ATTACHMENT
If necessary, the blade can be
FIG. 12
BLADE ALIGNMENT
SCREW
DUST EXTRACTION
The miter table attachment is equipped with a dust port for dust extraction. To use this feature, attach a vacuum hose (optional accessory) to the dust port, and then attach opposite end to a shop vacuum cleaner (Fig. 13).
FIG. 13
DUST
PORT