DM 2610925474 10-04 10/19/04 3:40 PM Page 13

STEP 2

STEP 3

 

 

 

 

 

 

Step 2. Unscrew the housing cap from the tool. Step 3. Remove the collet.

Note: If the collet nut and collet are not removed from the motor shaft, the tool will not function properly.

STEP 4

OPERATING INSTRUCTIONS

Disengagement of the Flex-Shaft

The flexible shaft may become disengaged if the motor of your rotary tool is not elevated higher than the working end of the flex-shaft. The #2222 Rotary Tool Stand is recommended to hold the rotary tool at the proper height.

Collet and Accessory Assembly

The collet assembly consists of a collet nut and collet. Take the collet nut and collet that were removed from your tool in step 2 and 3 and insert them into the tip of the flex-shaft handpiece.

Step 4. Install the driver cap on the motor shaft and tighten.

To prevent damage to tool, do ! CAUTION not overtighten driver cap.

Tighten the driver cap finger tight and then tighten an additional 1/3 turn with the wrench. (Wrench included with your rotary tool kit)

STEP 5

Step 5. Attach by screwing the collar of the flex-shaft to the rotary tool. Make sure the square end of the center core engages the square hole socket in the driver cap.

Do not pull out center core to ! CAUTION engage into driver cap. This

could cause disengagement of center core from handpiece. If tool stops when shaft is bent, center core may be lodged in driver cap. Loosen shaft and remove core from driver cap. Then screw flexible shaft onto rotary tool housing again.

Insert an accessory or bit as deeply as possible to avoid wobble during use. With the shaft lock button engaged on the flex-shaft handpiece retighten the collet nut.

Collet Removal and Replacement

Four different size collets to accommodate different shank sizes, are sold separately for your flex-shaft. To install a different collet, remove the collet nut and remove the old collet. Insert the unslotted end of the collet in the hole in the end of the flex-shaft. Replace collet nut on the shaft. Always use the collet which matches the shank size of the accessory you plan to use. Never force a larger diameter shank into a collet.

FLEXIBLE SHAFT LUBRICATION — The flexible shaft should be lubricated after every 25-30 hours of use. To lubricate, unscrew the flexible shaft assembly from the motor housing. Pull the center core out of the flexible shaft assembly. Wipe a very thin film of a good quality, high temperature grease on to the center core.

To prevent damage to tool do not ! CAUTION over grease shaft. Too much

grease will cause the unit to overheat. Dremel shaft lubricant No. 5990952 or automotive wheel bearing grease should be used.

Reattach the flex-shaft to the rotary tool.

Page 13

Page 12 Page 14
Page 13
Image 13
Bosch Power Tools 275T6, 285T6, 395T6 owner manual Step Operating Instructions, Disengagement of the Flex-Shaft
Page 12 Page 14

275T6, 285T6, 395T6 specifications

Bosch Power Tools has long been a trusted name for professionals and DIY enthusiasts alike, and the models 275T6, 285T6, and 395T6 demonstrate the brand's commitment to innovation, durability, and high performance. Each of these tools is meticulously designed to cater to various applications while delivering efficiency and reliability.

The Bosch 275T6 is a versatile tool that embodies power and precision. This corded electric tool features a robust motor that delivers exceptional torque and speed, making it ideal for heavy-duty tasks. One of its standout features is the variable speed control, allowing users to customize operation according to the material being worked on. Additionally, its ergonomic design ensures comfort during prolonged use, minimizing user fatigue. The 275T6 also incorporates advanced safety features, including a lock-on switch that prevents accidental activation and a protective housing that extends the tool's lifespan.

Next in line is the Bosch 285T6, which takes versatility a step further. This model is equipped with an innovative multi-functional design, allowing it to perform a variety of tasks, from drilling to sanding. Noteworthy is its quick-change chuck system, which enables users to switch between accessories with ease and efficiency. The 285T6 also features an integrated LED light that illuminates work areas, making it particularly useful in low-light conditions. Its lightweight construction does not compromise on durability, ensuring it can withstand rigorous use without hassle.

Finally, the Bosch 395T6 is designed for those who demand the highest performance under extreme conditions. This model boasts a heavy-duty motor that is optimized for high torque applications, making it perfect for demanding jobs in both wood and metal. The 395T6 incorporates tooth-tipped technology, enhancing cutting efficiency and prolonging blade life. In terms of user experience, the tool incorporates anti-vibration technology, which significantly reduces vibrations during operation, promoting stability and precision.

In summary, Bosch Power Tools' 275T6, 285T6, and 395T6 models are excellent choices for anyone in need of reliable and powerful tools. They come equipped with features that enhance user comfort, safety, and versatility. The combination of premium materials and innovative technology ensures these tools stand out in any toolbox, offering a robust solution for a wide range of applications. With Bosch, users can be assured of quality that translates into outstanding performance.
Top Page Image Contents