Bosch Power Tools 4100DG-09 manual HCS For flexibility, For superior speed and cleanliness

Jig Saw Blades

Jig Saw Blades

As the world’s largest jig saw tool and blade manufacturer, Bosch understands the demands of cutting materials quickly, smoothly and precisely. Bosch’s optimized jig saw blade configurations cut precisely and easily in conventional and specialized materials.

Blade configurations include Progressor® tooth design for superior performance in speed and cleanliness of cut, plunge blade tip shapes for easy plunge cutting in wood, longer blades for deep sandwich material cuts and flexible blades that provide strength in curve and angle cutting.

Bosch makes it easy for you to quickly find the blade that best fits the job with simple color coding and blade applications that are identified on each blade. For the professional that requires technical detail, key blade specifications are provided such as overall length and working length, blade materials, tooth design, angles and pitch (teeth per inch (TPI)).

Teeth (TPI)

Every material has a different thickness. To achieve the best possible cutting quality and the fastest cutting time, it is important to match material thickness with the proper blade geometry.

Always keep 2-3 teeth in material while cutting.

6 TPI

14 TPI

36 TPI

Progressor® Patented Tooth Design

The Progressor® name comes from the progressive tooth pattern that graduates from high to low teeth per inch over the length of the blade. The progressive tooth pattern is engineered so the blade can cut both thick and thin material cleanly and smoothly. The Progressor® line of blades are the ideal blades when switching from one material thickness to another, eliminating the need for blade changes and saving time on the job. Available for wood, metal or all purpose applications.

	HCS For flexibility.	Taper Ground
		For speed and increased blade life.
Thin Material	Ground Teeth	Thick Material	Tip Engineered
Small Teeth	For superior speed and cleanliness.
		Large Teeth	For easy plunge cuts.

Match the Blade to the Job

High Carbon Steel (HCS)

Excellent blades for softer materials such as wood, laminated particleboard and plastics.

Bi-Metal (BiM)	LASTS	LASTS
This highly flexible, tough combination of HSS	10X	2X
	LONGER	LONGER
and HCS results in a blade suitable for the most	THAN HIGH	THAN HIGH
	CARBON	SPEED
demanding applications when there is a risk of	STEEL	STEEL
	™	™
breakage or when extreme flexibility and versa-
tility are required.

High Speed Steel (HSS)

Fully hardened high speed steel blades are ideal for cutting metal, aluminum and non-ferrous metal.

Tungsten Carbide (TC)	LASTS
Use blades with tungsten carbide teeth to cut abra-	10X
	LONGER
sive materials such as reinforced plastics, fiberglass,	BI-METAL
	THAN
cement board and stainless steel. Use blades coated	™
with tungsten carbide grit to cut abrasive materials
such as tile, glass, cast iron and brick.

Tooth Design	Bosch blades are designed with optimal tooth spacing, tooth shape and cutting angle to give you
	the best possible speed, cleanliness of cut and optimal performance.

Side Set & Milled Side Set & Ground Wavy Set & Milled Ground & Taper Ground

For fast, rough cuts in wood and plastics.

For clean, fast cuts in wood and plastics.

For cuts in metal, non-ferrous metal, aluminum and plastics.

For precise, fine, clean cuts in wood.

70 Boschtools.com Toll Free:  877-BOSCH-99