Jig Saw Blades
Color Code
Bosch jig saw blades are now color coded by application: Blue for Metal, White for All Purpose, Gray for Wood, and Black for Specialty applications. Within each color, more detailed applications have been identified to further simplify blade selection.
Gray | Wood Bosch has designed a blade for every cutting application in wood, plywood, particleboard and |
laminated board. Whether you are looking for | |
| rough cuts, Bosch has designed and developed the right tooth configuration for the job. |
special 
Laminate
Fast and clean cuts through thick and thin wood.
Economical blades for quick cutting through soft and hard wood.
Clean, fine cuts for soft and hard wood and plastic.
Fast, coarse cuts for hard and soft wood.
Thick body blades for accurate, parallel cuts in thick materials, eliminating blade wander.
Blue |
| Metal For all cutting applications in metal, sheet metal, |
| cutting thin or thick material, curves, straight lines or fast cuts. | |
|
|
Fast cuts and long life in thick or thin metal, pipes and metal profiles.
Fast cutting for
Economical blades for straight cutting through metal.
| ||
White | ||
materials, so you don’t have to change blades | ||
|
|
Progressive tooth design for thick or thin materials including wood, wood with nails, plastic and aluminum.
Black | Specialty Designed to cut where other blades fail. |
stainless steel, tile, glass, brick, rubber, polystyrene, cement board and more. |
Clean and fine cuts on Plexiglas.
Carbide grit blades for curve cutting in wall tile, ceramic and fiberglass.
Knife blade for very soft mate- rials such as rubber, leather and polystyrene.
Carbide tipped blade for fast cutting in abrasive materials like cement board.
Carbide blade for clean, fine cuts in stainless steel and extended life over
Carbide blade for cutting solid surface materials such as Corian®.
Corian is a registered trademark of DuPont.
Toll Free: | Boschtools.com | 71 |
