BM 2610957386
Accessories
No-Mar Pad
The
Disconnect the air supply from the tool ! WARNING and remove nail strips before removing
or replacing
To remove the pad: Pull the no mar tip directly away from tool.
To replace the pad: Push the no mar tip on to the tool inserting the opening of the no mar tip on to the work contact element.
Storage area for the
FIG. 15
Work Contact
Element
Compressor
A correctly sized compressor is critical for maximum tool
performance. Use the following calculation to determine the FIG. 16 required compressor size.
Compressor size (CFM) = | Air Consumption(CFM) | |
60 | ||
|
x Shots per minute x Number of tools x 1.2
Air Consumption, one shot per second @ 100 psi: 1.8 CFM
Storage
13.