BM 2610021333
Maintenance
Service
Maintenance performed by unauthorized ! WARNING personnel may result in misplacing of the
internal components which could cause serious hazard. We recommend that all tool service be performed by a BOSCH factory service center or authorized BOSCH service station.
Contact your BOSCH service center for instructions and the following user replaceable parts:
For all other repairs contact your BOSCH service center.
Cleaning
When cleaning a tool be careful not to ! WARNING disassemble any portion of the tool since
internal components may be misplaced or safety components may be improperly mounted. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts and
Do not attempt to clean by inserting ! WARNING pointed objects through openings. Sharp edges may damage internal components causing a serious
hazard.
Ventilation openings and the trigger must be kept clean and free of foreign matter. Periodically clean the tool with compressed air.
Clean the magazine. Remove metal or wooden chips which may have accumulated in the magazine. Periodically clean magazine with compressed air.
ACTION | WHY | HOW |
Drain air line filter | Prevent | Open manual |
daily | accumulation of | valve |
| moisture |
|
| and dirt |
|
|
|
|
Keep lubricator | Keep the Nailer | Fill with BOSCH |
filled | lubricated | pneumatic tool |
|
| lubricant |
|
|
|
Clean filter element | Prevent clogging | Follow |
- then blow air | of filter with dirt | manufacturer's |
through filter in |
| instructions |
direction opposite |
|
|
to normal flow |
|
|
|
|
|
Clean magazine | Prevent a jam | Blow mechanism |
and feeder |
| clean daily |
|
|
|
Keep trigger | Promote operator | Blow clean daily |
working properly | safety and efficient |
|
| tool operation |
|
|
|
|
Lubricate the tool | Extend tool life | Place |
|
| lubricant |
|
| into the tool as |
|
| directed |
|
|
|
Drain air | Keep water out | Open valve on air |
compressor | of tool | compressor tank |
|
|
|
Storage
When not in use, the tool should be disconnected and stored in the storage case in a warm and dry place. When tool will not be in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.
Do not store the tool in a cold weather environment.
Keep out of reach of children and personnel unfamiliar with tool operation.
Lock the storage area. Tools are dangerous in the hands of personnel unfamiliar with the tool.
12.
