DM 2610958399 10-10:DM 2610958399 10-10 10/5/10 10:56 AM Page 14

accomplished by ensuring that the segmented portion of the blade is facing the wall or corner.

SCRAPING

Scrapers are suitable for removing old coats of varnish or adhesives, removing bonded carpeting, e.g. on stairs/steps and other small/medium size surfaces.

Select low to medium speed.

Rigid scrapers are for large area removal, and harder materials such as vinyl flooring, carpeting and tile adhesives. When

removing strong, tacky adhesives, grease the scraper blade surface with (petroleum jelly or silicone grease) to reduce gumming up.

The carpet/vinyl flooring removes easier if it is scored prior to removal so the scraper blade can move underneath the flooring material.

Flexible scrapers are used for hard to reach areas and softer material such as caulk.

Mount the scraper blade with the logo side facing up. With the flexible scraper, make sure that the screw head does not make contact with surface during the scraping process (a 30

-45 degree pitch is recommend). This can be accomplished by making sure that the tool is at an angle to the blade. You should be able to see the blade flex during the scraping process.

If you are removing caulk from a delicate surface such as a bath tub or tile back splash, we recommend taping or protecting the surface that the blade will rest on. Use rubbing alcohol to clean the surface after the caulk and/or adhesive is removed.

Turn the tool on and place desired accessory on the area where material is to be removed.

Begin with light pressure. The oscillating motion of accessory only occurs when pressure is applied to the material to be removed.

Excessive pressure can gouge or damage the background surfaces (e.g,. wood, plaster).

SANDING

Sanding accessories are suitable for dry sanding of wood, metal, surfaces, corners and edges and

hard to reach areas.

Work with the complete surface of the sanding pad, not only with the tip.

Corners may be finished using the tip or edge of the selected accessory, which should occasionally be rotated during use to distribute the wear on the accessory and backing pad surface.

Sand with a continuous motion and light pressure. DO NOT apply excessive pressure - let the tool do the work. Excessive pressure will result in poor handling, vibration, and unwanted sanding marks and premature wear on the sanding sheet.

Always be certain that smaller workpieces are securely fastened to a bench or other support. Larger panels may be held in place by hand on a bench or sawhorses.

Open-coat aluminum oxide sanding sheets are recommended for most wood or metal sanding applications, as this synthetic material cuts quickly and wears well. Some applications, such as metal finishing or cleaning, require special abrasive pads which are available from your dealer. For best results, use Bosch sanding accessories which are of superior quality and are carefully selected to produce professional quality results with your oscillating tool.

The following suggestions may be used as a general guide for abrasive selection, but the best results will be obtained by sanding a test sample of the workpiece first.

Grit

Application

Coarse

For rough wood or metal

 

sanding, and rust or old

 

finish removal.

Medium

For general wood or metal

 

sanding

Fine

For final finishing of wood,

 

metal, plaster and other

 

surfaces.

With the workpiece firmly secured, turn tool on as described above. Contact the work with the tool after the tool has reached its full speed, and remove it from the work before switching the tool off. Operating your oscillating tool in this manner will prolong switch and motor life, and greatly increase the quality of your work.

Move the oscillating tool in long steady strokes parallel to the grain using some lateral motion to overlap the strokes by as much as 75%. DO NOT apply excessive pressure - let the tool do the work. Excessive pressure will result in poor handling, vibration, and unwanted sanding marks.

-14-

Page 13 Page 15
Page 14
Image 14
Bosch Power Tools MX25E manual Scraping, Grit Application
Page 13 Page 15

MX25E specifications

The Bosch Power Tools MX25E is a high-performance oscillating multi-tool designed for versatility and efficiency in a variety of applications. It is particularly well-suited for both professional contractors and DIY enthusiasts who require a reliable tool capable of tackling a range of tasks, from cutting and sanding to scraping and grinding.

One of the standout features of the MX25E is its powerful 2.5 amp motor. This motor provides excellent performance, allowing users to work effortlessly on tough materials such as wood, metal, and even drywall. The tool’s variable speed control allows for adjustment between 8,000 and 20,000 oscillations per minute, giving users the flexibility to select the optimal speed for their specific application. This ensures precise control whether the user is performing delicate tasks or more robust cutting jobs.

The MX25E boasts an innovative Starlock accessory interface, which allows for quick and tool-less accessory changes. This unique system is compatible with a wide range of attachments from various manufacturers, making it easy to switch tasks without wasting time. The tool is designed to minimize vibration and noise during operation, helping to enhance user comfort and productivity, especially during extended use.

Another notable characteristic of the Bosch MX25E is its ergonomic design. The tool features a soft-grip handle that provides a secure and comfortable grip, reducing fatigue during longer projects. Additionally, the compact size and lightweight construction make it easy to handle, ensuring maneuverability in tight spaces.

The integrated blade guard adds an extra layer of safety, allowing users to work with increased confidence. Furthermore, the MX25E features an onboard dust extraction port that can be connected to most standard vacuum systems, keeping the work area clean and minimizing dust exposure.

Durability is also a key aspect of the MX25E’s design. The robust construction ensures that the tool can withstand the rigors of heavy use day in and day out. With its combination of performance, versatility, and user-friendly features, the Bosch Power Tools MX25E stands out as a powerful multi-tool that is ideal for a broad range of professional and home improvement projects. This tool not only meets but often exceeds the expectations of users seeking reliability and superior performance in their toolkit.
Top Page Image Contents