B
41
B
Operating Instructions
Transport e.g. when moving
Before transporting the washer-dryer:
Turn off the water tap,
Drain any residual washing solution (refer to Page 30),
Release the water pressure in the supply hose(refre to
Page 30),
Disconnect the washer-dryer from the mains,
Dismantle the supply and drainage hose,
Install the transport bolts.
Having transported the appliance and ensured proper ins-
tallation and connection, allow the Draining program to
run through before starting the first wash program.
Preparing and inserting the transport bolts
Remove the covers C.
Remove the rear panel D (see page 38), prepare the
transport bolt.
Insert and tighten the bolts.
Reinstall the rear cover D.