50
CHANGING SOURCE SETTINGS
CHANGING SOURCE SETTINGS
EnglishDeutschFrançais DanskEspañolItalianoSvenska Nederlands DanskItalianoSvenska DeutschNederlands EnglishFrançais Español
To make changes in the settings menus
Whether you use your TV screen or the media center display to change settings, the same
instructions apply.
You can use the actions on page 49 to change back to the original (default) settings, too. Do
that if you do not like the effect of a change you have made, or accidentally made a change
you did not intend. The default settings for each source are shown in the menu tables on the
following pages.
1. Turn on your TV and select the correct TV input to view your 3•2•1 GSX system.
2. Press a source button on your 3•2•1 remote control.
3. Press Settings to display the Settings menu for the selected source.
4. Using the down ( ) and up ( ) arrow buttons, select the menu item you want to change.
5. Press the right arrow ( ) button to select the menu item setting.
6. Press the up ( ) or down ( ) arrow button to change the setting.
7. Press Enter or the left arrow ( ) button to save the setting.
8. Press Exit to leave the Settings menu.
The progression in Figure 34 shows the output mode for the FM tuner being changed from
Auto to Stereo.
Figure 34
Changing the FM output
mode setting
Note: Y
ou can restore all default settings by choosing
Restore Settings
in the Systems menu,
under
Media Center
options. This reverts all source settings back to the factory default settings.
It also changes the
Audio Processing
setting back to
Automatic
(found in the Systems menu
under Audio options).
FM
Output Mode: Auto
FM
Output Mode: Auto
FM
Output Mode: Stereo
The down arrow
button was pressed
to select the Output
Mode menu item.
The right arrow
button was
pressed to select
the setting.
The up or down
arrow button
was pressed to
change setting
from Auto to
Stereo.