English
Español Français
SETTING UP
Powered Acoustimass® module
Figure 3
Position options for your Acoustimass module
Acoustimass® speaker technology makes it difficult to locate the source of
•Locate the module at the same end of the room as the TV screen.
•Keep the module at least 2 feet (.6 m) from your TV set to prevent interference.
•To increase bass effects, turn the front opening toward a wall; turn it away from the wall to decrease bass effects.
•Keep both the front opening and the ventilation grille on the bottom of the module at least 2 inches (5 cm) from any other surface.
•Do not block the ventilation grilles located on the bottom of the module.!
Impeding ventilation can cause a reduction in the
PreferredAlternate
Front opening | Ventilation grille |
Making the connections
Figure 4
Speaker cable connection to an output jack on the module and to the speaker
Only the Acoustimass module connects to your receiver. The small speakers all connect directly to the Acoustimass module.
WARNING: Connecting the small speakers to a receiver can result in damage to your system and possible electric shock.
Connecting speakers to the Acoustimass module
Insert the connector on each speaker cable into the jack on the module. Refer to the label on each connector to match it to the proper jack.
Supplied | Right front | |
speaker | ||
speaker cable | ||
| ||
| Red collar | |
Matched markings | to red speaker terminal | |
|
1.Use the supplied
Insert the connectors, as labeled, into jacks on the module as follows! (Figure 5 on page 8).
•R goes into the jack labeled Right Front.
•C goes into the jack labeled Center Front.
•L goes into the jack labeled Left Front.
7
