TAB 8 | TAB 7 | TAB 6 | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
PREPARATION
Before you begin...
Thank you for choosing Bose® Virtually Invisible® 791 speakers for
Please be sure to read this guide carefully before you do any cutting. There are many factors to consider before proceeding with this type of installation.
Unpacking
Carefully unpack the speakers. Check to be sure the carton includes all the parts shown.
Template/Paint shield
Speaker grilles
Other equipment you will need
Hardware for securing the speaker to your ceiling is attached to the speaker. In addition, you need a ladder and the equipment below to make the installation go smoothly.
Wire cutter/stripper
Speaker cable
Spade drill bit
Power drill Cutting tool*
Sharp pencil | Painter’s tape** Protective eyewear |
Tape measure | Stud finder | |
or |
|
|
screwdriver |
|
|
Speakers
If any part of the speaker pair appears damaged, do not use it. Notify Bose or your authorized Bose dealer immediately. For Bose contact information, refer to the address list included in the carton.
Note: With the speakers unpacked, you can find the serial numbers on the back of each one. Then you can copy the numbers onto your warranty card and in the “For your records” space on page ii.
If painting is in your plan
Be sure to read “Painting the exterior parts” on page 11 before you begin installing your speakers. There are a number of suggestions on how to protect the speakers and spread the paint evenly on the speakers before you secure them in your ceiling.
2