INSTALLATION
Mounting the aircraft panel connector
The aircraft panel connector is part of the optional
Visit Bose.com or Global.Bose.com for information or purchase.
CAUTION: The aircraft panel connector must be mounted by a technician who is qualified to perform this type of avionics installation for the aircraft you are using.
Mount the connector into a cutout, using the diagrams below as a guide.
12.5mm
.49" 
AIRCRAFT INTERFACE SCHEMATIC
14.0mm | RED |
| • | 1 | V+IN |
BLK |
| ||||
.55" | BLK/WH | • | 2 | GND | |
| WHT | ||||
| • | 3 | COMM L | ||
| BLU |
| |||
|
| • | 4 COMM R | ||
RECEPTACLE - PINOUT (FRONT VIEW) | WHT |
| |||
| • | 5 | MIC HI | ||
| WH/BLU | ||||
Pin 6 | • | 6 | MIC LO | ||
|
| BLK/WH | |||
|
|
|
|
| |
Pin 1
Connect the eight wires as follows:
•Two for the microphone
•Two for audio
•One for power
•One for ground
•Two for audio shields
Audio and microphone wires should be connected to the back of the existing microphone and headphone jacks, leaving existing jacks intact for use with conventional headsets. This is usually the fastest installation method.
31
