Step
2
Step
2
Preparing for Use
To control the TV
1. | Turn on both the 3•2•1 system and your TV. |
|
2. | Press and hold the Program and TV On/Off | English |
| signal that you have entered programming | |
| buttons (shown on the left) for 3 seconds. |
|
| The remote Source buttons will light to |
|
| mode. |
|
|
| |
3. | Use the number keys to enter your TV’s |
|
|
| |
4. | Press Program once to complete program- |
|
| ming. The remote will flash once to indicate |
|
| successful programming. To confirm that, |
|
| use the remote to turn your TV on and off or |
|
| change channels. |
|
Note: If your advanced remote flashes rapidly several times during programming, an error has occurred. Wait 7 seconds for the remote to clear and begin programming again.
To control the cable/satellite box
1.Turn on both the 3•2•1 system and your cable/satellite box.
2.Press and hold the Program and Guide buttons (shown on the left) for 3 seconds. The remote source buttons will light to signal that you have entered programming mode.
3.Use the number keys to enter your cable/ satellite box’s
4.Press Program once to complete program- ming. The remote will flash once to indicate successful programming. To confirm that, use the remote to change cable/satellite channels.
Note: If your advanced remote flashes rapidly several times during programming, an error has occurred. Wait 7 seconds for the remote to clear and begin programming again.
5
AM272394_00_pdf • October, 2003
