TAB 8, 16

TAB 7, 15

TAB 6, 14

TAB 5, 13

TAB 4, 12

TAB 3, 11

TAB 2, 10

English

SOUNDDOCK® 10 DIGITAL MUSIC SYSTEM

Setting up your system

1.Place your SoundDock 10 digital music system on a flat, stable surface.

2.Plug the small end of the AC power cord into the AC power connector on the back of the unit.

3.Plug the other end into a live AC (mains) outlet. After you hear two short tones from your SoundDock 10 system, it is ready to use.

CAUTION: Do not cover the ventilation openings of the product. The slots on the top provide ventilation for the built-in electronic circuitry and shall not be blocked.

Note: When handling the SoundDock 10 system, the front structure containing the iPod/iPhone dock may feel loose. This is normal. This part of the system is intentionally designed to prevent speaker vibration from interfering with the operation of your iPod/iPhone.

AC IN

Note: The tonal quality of your SoundDock 10 system will vary with placement. For example, moving the system toward a corner will increase bass response; moving it away from the corner will decrease bass response.

System on/off control

You can turn on your SoundDock 10 system in any of the following three ways:

Dock a device.

Press any key except OFF on the Bose® remote.

Press any key on the docked device.

To turn off the SoundDock 10 system, do either one of the following:

Press OFF on the SoundDock 10 remote.

Remove the docked device.

2

Page 6
Image 6
Bose AM314136 manual Setting up your system, System on/off control