SYSTEM SETUP
9
SYSTEM SETUP
English FrançaisEspañol
• Aim the port of the module into the room or along the wall to prevent over-powering bass.
• Stand the Acoustimass® module on its feet. Do not lay it on its side or stand it on either end
(Figure 7).
• Attach the large rubber feet to the bottom of each foot on the module. The rubber feet
provide increased stability and protection from scratches.
Figure 7
Recommended orientation
for the module
CAUTION: Do not block the openings on the back of the module. These openings provide
ventilation for the built-in circuitry.
CAUTION: The Acoustimass module generates a magnetic field. Although this is not an
immediate risk to your video tapes, audio tapes, and other magnetic media, you should not store
any of these items directly on or near the module.
Making system connections
The labeled jacks on the rear of the Acoustimass module and the custom cables supplied
with the system ensure a fast and easy hookup.
CAUTION: Do not plug the Acoustimass module into an AC power (mains) outlet until all other
connections are made.

Connecting the speakers to the Acoustimass module

1. On the rear panel of the Acoustimass module, insert the single-plug end of the speaker
cable into the SPEAKERS jack (Figure 8). Firmly tighten the two thumbscrews on the
connector.
Figure 8
Speaker cable connection
to the Acoustimass module
ACINPUT
MUSICCENTER
Thumbscrews
Speaker cable