Boss Audio Systems 822UA MP3 Operations, Loading CD, Navigating Through Directories and Tracks

MP3 OPERATIONS

Notes :

-An MP3 directory is shown in this manual as Directory, and an MP3 file is shown as Track.

-Maximum length of file name : 28 characters.

-Maximum length of directory : 16 characters.

-Supports Multi-Session recording.

-Supports CD, CDR and CDRW. (Playback of MP3, CD-R and CD-RW may depend on recording conditions)

-Disc written by Packet Write (UDF) is not supported.

LOADING CD

Insert the CD as usual, if it is an MP3 CD, the display will show READ CD then the message MAX *** will appear, when disc scanning completed, the first track on the first directory will play. NOTE: (1) D-AUD ICON turns on when a MP3 disc is playing.

NAVIGATING THROUGH DIRECTORIES AND TRACKS

There are five ways to select three favourite track/directory

(1).Folder UP/Down

Press Folder up (M6)/F+ or Folder down Button (M5)/F- briefly to skip Folder.

(2).10-Track Up/Down Button

Press 10-Track up (M6)/ or 10-Track DOUN Button (M5)/ for more than 1seconds skip10

(3).By track Number

Under MP3 play mode, press AMS Menu button once, the display shows T*,Rotate the ENCODER VOLUME KNOB to scroll through the numbers

(4).To select directory first

Under MP3 play mode, press AMS/MENU Button twice Then the first directory name is shown.

Turn the Encoder Volume knob to navigate through the directory list, press MP3 Enter button To select the desired directory. The display will show\\. Turn the Encoder Volume knob to select the tracks under the selected directory, press MP3 enter button to confirm When Desired track is found.

(5).By directory or Track Name

Under MP3 Play Mode, press AMS/MENU button three times, the display shows * , enter the name by rotating encoder volume knob directly, Press MP3 Enter button to confirm.

If partial directory/Track name is entered, then all directory/Track with matched characters are displayed, Turn the Encoder Volume knob to go through the list, press MP3 Enter button to confirm.

If directory name is selected, the display will show \\ , under this condition, Turn the Encoder Volume knob to select the tracks under the directory, press AMS/MENU button to confirm.

E - 10