7. MENU OPERATIONS
To use this function keep press short AUDIO/MENU Button for few seconds, each time you press this button the mode will move and the functions will shown on the display, turn the encoder volume knob up/ down to set the desires functions ,the function states as following:
BASS ( Bass level )
Turn the encoder volume knob to adjust the desired Bass level range from
TREBLE ( Treble level )
Turn the encoder volume knob to adjust the desired Treble level range from
BALANCE
Rotate the encoder volume knob to adjust the Balance between the right and left speakers from R10 to L10, the “C00” is default.
FADER
Rotate the encoder volume knob to adjust the Fader between the front and rear speakers from F10 to R10, the “C00” is default.
TIME SET (CLK)
The time on the clock is set to “12:00” by default, Rotate the encoder volume knob to adjust the minutes and hours.Press AUDIO/MENU button to select the hour or minute. Note: Time format can not to set up, it should be follow the tunner area to change, when is in U.S.A Latin then the time in 12H by default, when is in Europe Latin then the time in 24H by default.
Programmable Turn-on Volume (P-VOL )
This option allows selection of the volume level the radio will automatically assume when first turned on. " P - VOL 40 " is the default setting, which will turn the radio on at the volume level selected when the unit was last turned off. To program a specific volume level for the radio to turn on at, rotate the volume control to select "VOLUME LEVEL”. Within 5 seconds.
BEEP ON / OFF
Rotate the encoder volume knob to select Beep On / Off option.
Beep Off: disable audible beep tone when any function is accessed.
Beep On: enable audible deep tone.
16) PRESET EQUALIZER BUTTON (EQ)
Press this button to toggle the following EQ setting:
POP -> JAZZ -> CLAS -> BEAT ->ROCK ->DSP OFF
At DSP OFF mode, EQ will be controlled by Bass/Treble setting.
15)iX-BASS BUTTON
Press the
E - 7
