To avoid damage, please follow these precautions:
-Do not subject it to excessive shock.
-Do not carry in a pocket.
-Do not leave in direct sunlight.
Battery replacement
The remote control uses a lithium button type battery, model CR 2025 3V. Do not use any other kind of battery in the remote. Follow these instructions when installing or replace the battery.
1.Remove the battery holder by pressing the locking tab with your thumb, and slide the battery holder out.
2.Replace the battery with the same type of battery with the (+) side facing up.
3.Gently push in the holder until it is se- curely locked in place.
General operation
Initial system
Be sure to press the RESET button (25) when using the unit for the first time, after all connections are completed correctly.
1.Turn off the unit power.
2.Press the RESET button.
*The RESET button on the housing must be activated with either a ballpoint pen or similar pointed object. The RESET button is to be activated for the following reasons: - Initial installation of the unit when all wir- ing is completed.
- Some the function buttons do not operate. - Error symbol appears on the display.
Turning power on and off
Turn on the unit by pressing button or inserting a disc in the DISC SLOT (22). When system is on, press and hold the to turn off the unit.
Warning LED
The LED (24) will flash if the front cover is not properly inserted into the main unit.
ESP function
The unit features an
CD,VCD:18 seconds MP3:160 seconds DVD: 6 seconds MPEG4: 20 seconds
Mute function
To turn off the sound instantly, press the MUTE button. To return it to the prior sound level, press MUTE again.
Mode function
Press MODE repeatedly to switch between DVD, USB,SD/MMC , AV and TUNER modes.
BV7300 User’s Manual - page 9