Boss Audio Systems BV7300 manual Data disc playback, USB playback

Data disc playback

When you insert a data disc including audio (MP3), movie (MPEG4) or picture (JPEG) files into the disc slot, the following main menu will appear:

Press the DISP to switch to the following interface.

Use the cursor buttons (▲/▼/◄/►) to select the required file type (Music

,Picture or Movie) or a folder / file on the screen you wish to play, then press the ENTER button to confirm your selection.

Playback type icons:

AUDIO Playback mode (default) JPG Playback mode

MOVIE Playback mode

In JPEG playback mode or MOVIE play- back mode, press the (STOP) to return to the main menu.

USB playback

This disc player features a front panel USB interface (10). A USB device can be con- nected to this port.

When you insert a USB device into the USB connector, the DVD player will read the USB automatically.

The unit gives priority to a disc or SD/MMC card. If you insert a disc into the disc slot or insert a SD/MMC card into the SD/MMC in- terface while playing from the USB device, the unit will play the disc or the SD/MMC.

Press the MODE button to switch to the USB playback mode.

Note:

When reading the USB device, please don’t unplug it. If the player is unable to read the device, check if the device is in good condi- tion. You may also try removing the device fully from the port, and reinserting it again.

- The main unit can only support the stan- dard USB-memory format approved by Microsoft.

-USB MP3 player is not a “standard,” which means different brands or models have their own standards. Therefore, this unit may not support every MP3 player.

-When connecting an MP3 player which has a normal non-rechargeable battery in the player, you should remove the battery from the MP3 player before you connect it to the USB port. Otherwise, the battery may explode.

BV7300 User’s Manual - page 19