OfficeServ 12 General Description Guide/Ed.01 CHAPTER 4. Business Feature Package
© SAMSUNG Electronics Co., Ltd. Page 4-13
station’s dialing class. Each station can be assigned different classes of service for
day and night operation.
1.1.21 Common Bell Control
The system provides relay that may be programmed to control a customer-provided
common bell or common audible device. These contact must be programmed as
member of a station group and may provide steady or interrupted closure.
1.1.22 Conference
The system allows six simultaneous conferences up to 5 parties each.
ADD-ON (5 PARTY)
Any combination of up to five parties(stations or outside lines) can be joined together
in an add-on conference. Parties may be eliminated or added after a conference h as
been established.
UNSUPERVISE
A station user may set up a conference with two or more outside lines and then exit
the conference leaving the outside lines connected in an unsupervised(trunk to trunk)
conference.
SPLIT
A phone user can ‘split’ a conference into separate outside calls, then speak with each
caller privately. Then the individual calls can be conferenced again in any
combination.
This feature requires individual trunk buttons and auto-hold must be enabled.
1.1.23 Computer Telephony Integration (CTI)
Computer Telephone Integration(CTI) allows integration between the OfficeServ 12
and a personal computer system(PC) or a local area network(LAN). Caller ID service
is required for TAPI inbound call applications that use the CID information to display
computer records in conjunction with the presentation of the call to the station on the
OfficeServ 12.
TAPI 2.1
TAPI 2.1 is the method of integrating the OfficeServ 12 system to a computer. TAPI
2.1 is a LAN based solution allowing computers to communicate d irectly to the
telephone system over the network system. This establishes a logical connection