32
System Settings (Settings for the Entire RC-300)
Settings that are shared by the entire RC-300, such as those for the contrast of display and
the auto o function are called “system settings.”
First press the [SYSTEM] button.
For details, refer to “Basic Editing Procedure” (p. 9).
Parameter Value Explanation
Sys:LCD Contrast
8Adjusting the Display’s Brightness (LCD Contrast)
In some locations where the RC-300 is set up, you may nd that the display is dicult to read.
If this occurs, adjust the display’s contrast.
1–16 Adjusts the contrast of the display in a range from 1 (lightest) to 16 (darkest).
Sys:LOOP FX Pdl
FX ON/OFF + ASGN Specifying the Operation of the [LOOP FX] Pedal
Here you can specify the operation of the [LOOP FX] pedal.
FX ON/OFF + ASGN Controls LOOP FX on/o and the Assign function (p. 23).
ASSIGN Controls only the Assign function (p. 23).
Sys:MemoryExtent
1 => 99 Limiting the Phrase Memories That can be Switched

(Phrase Memory Extent)

By setting the upper and lower limits for the phrase memories the RC-300 can switch to, you’ll more easily be able to
select the phrase memories you need.
Press [ ] /[ ] button to move the cursor, and turn the [MEMORY/VALUE] knob to set the upper and lower limits of
the range.
1–99 Upper and lower limits for phrase memories the RC-300 can switch to
Sys:Knob Mode
IMMEDIATE Setting the Knob/Slider Functions (Knob Mode)
This sets the way the values of settings are changed when the knobs/sliders are operated.
The Knob Mode setting works with respect to the RHYTHM [LEVEL] knob and TRACK [1]–[3] sliders.
Value Value when the phrase memory is loaded Value when a knob or slider is operated
IMMEDIATE Value specied by the phrase memory Value will change immediately
MEMORY SETTING Value specied by the phrase memory
Value will start changing when the knob or
slider is moved to a position matching the
value in the phrase memory
KNOB POSITION Value of the knob or slider position Value will change immediately