System Settings (Settings for the Entire RC-300)
33
Overview Basic Operation Saving Track
Phrase Memory
Rhythm LOOP FX USB MIDI AppendixSystem Settings
Parameter Value Explanation
Sys:Auto Rec
Trigger 50 Adjusting the Auto Recording Sensitivity (Trigger Level)
This sets the input level at which recording is started (the trigger level) when Auto Recording (p. 22) is used.
0–100 Input levels at or above the value set here will cause recording to start.
Sys:REC Pdl Act
REC→OVERDUB Changing the Switching Order of Recording g
Overdubbing g Playback (REC Pedal Action)
When you press the [REC/DUB/PLAY] pedal, the RC-300 will switch its operation in the order of recording g
overdubbing g playback (p. 10). However, you can change this so that the order is recording g playback g
overdubbing.
REC g OVERDUB Operation will switch in the order of Recording g Overdubbing g Playback.
REC g PLAY Operation will switch in the order of Recording g Playback g Overdubbing.
Sys:Input Out
MEMORY
Sys:Track1 Out
MEMORY
Sys:Track2 Out
MEMORY
Sys:Track3 Out
MEMORY
Sys:Rhythm Out
MEMORY
Using the Same Output Jacks for All Phrase Memories (Input/Track 1, 2, 3/Rhythm Output)
Normally, the settings determining which jacks are used in outputting input sounds, tracks, and rhythm sounds are
stored in each phrase memory, but you can select, as a setting aecting the RC-300 overall, to have all of these use
the same output at all times.
MEMORY The output destination specied by the phrase memory will be used.
MAIN Regardless of the setting of the phrase memory, the sound will be output from the MAIN
OUTPUT jacks and the PHONES jack.
SUB
Regardless of the setting of the phrase memory, the sound will be output from the SUB
OUTPUT jacks. The sound will not be output from the MAIN OUTPUT jacks or the PHONES
jack.
MAIN+SUB Regardless of the setting of the phrase memory, the sound will be output from the MAIN
OUTPUT jacks, the SUB OUTPUT jacks, and the PHONES jack.
MUTE
(Input Out only)
Regardless of the setting of phrase memory, the input sound will not be output.
* Tracks will be recorded.
Sys:SUB OUT Lev
100 Adjusting the Output Level of the SUB OUTPUT Jacks
(SUB OUTPUT Level)
You can adjust the output level of the SUB OUTPUT jacks.
0–200 Output level of the SUB OUTPUT jacks.
Sys:Auto Off
ON Auto O Settings
The RC-300 can turn o its power automatically. The power will turn o automatically when 10 hours have passed
since you last played or operated the unit. The display will show a message approximately 15 minutes before the
power turns o.
With the factory settings, this function is turned “ON” (power-o in 10 hours). If you want to have the power remain
on all the time, turn it “OFF.”
NOTE
When the power is turned o, any settings you were editing will be lost. You must save settings that you want
to keep.
OFF The power will not turn o automatically.
ON The power will automatically turn o when 10 hours have passed since you last played or
operated the RC-300.