Bostitch FN1664 manual DIAL-A-DEPTH Fastener Control Adjustment, Bostitch, Inc

DIAL-A-DEPTH™ FASTENER CONTROL ADJUSTMENT

The DIAL-A-DEPTH™ Fastener control adjustment feature provides close control of the fastener drive depth: from flush with the work surface to shallow or deep countersink.

First set the air pressure for consistent drive in the specific work as described on page 4, then use the DIAL-A-DEPTH™ fastener control adjustment to give the desired depth of drive.

Dial-A-DepthTMFastener Control Adjustment

IN ADDITIONTOTHE OTHER WARNINGS CONTAINED INTHIS MANUAL OBSERVETHE FOLLOWING FOR SAFE OPERATION

•Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.

•Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

•Do not use the tool as a hammer.

•Always carry the tool by the handle. Never carry the tool by the air hose.

•Do not alter or modify this tool from the original design or function without approval from

BOSTITCH, INC.

•Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

•Never clamp or tape the trigger or contact trip in an actuated position.

•Never leave a tool unattended with the air hose attached.

•Do not operate this tool if it does not contain a legible WARNING LABEL.

•Do not continue to use a tool that leaks air or does not function properly. Notify your nearest Bostitch representative if your tool continues to experience functional problems.

-9-