FASTENER DEPTH CONTROL ADJUSTMENT
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER
DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING
ANY PARTS DISASSEMBLY AND BEFORE CHANGING THE WORK
CONTACTING ELEMENT ADJUSTMENT.
1. Push in on locking button.
2. Adjust contact arm up to increase |
| PUSH IN |
|
| |
depth of drive or down to decrease it. | ADJUST | |
|
| RELEASE |
3. Release locking button
LOCKING BUTTON CONTACT ARM
DIRECTIONAL EXHAUST DEFLECTOR
Exhaust Deflector
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of any tools.
NOTE: N88 Series share the same tool free adjustable exhaust deflector.
REMOVING NAILS
N88WW
PUSHER
PUSHER LEVER
NAIL STOP
1.Push down on pusher lever
2.Allow pusher spring to pull the pusher forward until it stops in the forward position
3.Slide the nails back to the nail stop
4. Push down on | 5. Slide the nails out |
the nail stop | of the magazine |
N88RH
2
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.
1 |
