Bounty Hunter 3300 owner manual Batteries, To install the batteries

BATTERIES

Use ALKALINE batteries only.

To install the batteries:

● Remove	the
battery cover by
disengaging	the

clip at the back.

● Align the polarity of the batteries correctly, with the positive "+" toward the coil plug connection, as indicated by the + and – indicators on the housing.

●Insert (2) 9-Volt ALKALINE batteries, with the contacts pointed inward, and press down on the back of the batteries to snap them into place.

Some brands of batteries will require moderate force to clear the

retaining tabs.

If the batteries fit loosely, and you want to guarantee a very secure electrical contact, insert a piece of paper or thin cardboard between the back of the battery and the supporting post. You may also

CAREFULLY pry back the four contacts with a flat-head screwdriver.

IN CASE OF LOOSE BATTERIES

●Replace the battery door.

Most metal detector problems are due to improperly installed batteries, or the use of non-alkaline or discharged batteries. If the detector does not turn on, please check the batteries.

If the detector does not turn on, check to see that the batteries fit tightly. If the batteries are loose, press them forward while pressing the POWER touch pad. To tighten up a loose battery, wedge a piece of paper or thin

6