BATTERIES
Use ALKALINE batteries only.
Follow these steps to install the batteries.
●1 Carefully remove the battery compartment door by pressing the release clip on the right side of the door.
●2 Snap one battery on to each of the terminals and place the batteries inside the compartment.
The battery compartment is a tight fit. Insert one battery with the terminals facing down, and the second battery with the terminals facing outward. See illustration.
●3 Replace the compartment door by first inserting the hinge on the side opposite of the release clip.
●4 Then, press down firmly on the clip side until the battery door snaps into place.
First Battery terminals facing in
Second Battery terminals facing out
Release
Clip
Second Battery
First Battery
4
