II 08370 Issue 2
| DM™605 S2 |
|
Description | ||
Drive units | 2x 180mm (7in) paper/Kevlar® cone bass | |
| 1x 180mm (7in) woven Kevlar® cone midrange | |
| 1x 26mm (1in) metal cone | |
Frequency range | ||
Frequency response | 25Hz (adjustable) – 20kHz ±3dB on reference axis | |
Dispersion | Within 2dB of response on reference axis | |
| Horizontal: over 40° arc | |
| Vertical: over 10° arc | |
Sensitivity | 91dB spl (2.83V, 1m) | |
Harmonic distortion | 2nd & 3rd harmonics | |
| <1% 42Hz – 20kHz (90dB spl, 1m) | |
Nominal impedance | 8Ω (minimum 3Ω | ) |
Crossover frequencies | 230Hz, 4kHz |
|
Passive power handling | ||
Max. recommended | 0.1Ω |
|
speaker cable impedance |
|
|
Amplifier | Power output: | 130W continuous |
| Input impedance: | 100kΩ |
| Signal/noise: | 91dB |
| Functions: | Bass level |
|
| Bass equalisation |
|
| LFE phase 0°/180° |
|
| |
| Inputs: | Speaker level (binding posts) |
|
| LFE (RCA Phono) |
| Outputs: | LFE link to 2nd unit (RCA Phono) |
Dimensions | Height: | 996mm (39.2 in) |
| Width: | 236mm (9.3 in) |
| Depth: | 440mm (17.3 in) |
Net weight | 31kg (68.2 lb) |
|
Kevlar is a registered trademark of DuPont.
B&W Loudspeakers Ltd reserves the right to amend details of the specification without notice in line with technical developments.
Copyright © B&W Loudspeakers Ltd. Printed in England.
B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX, England. Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725
http://www.bwspeakers.com