A c t i v e 1
A c t i v e l o u d s p e a k e r s y s t e m
Product Summary
●Behind the John Bowers Active 1 is a simple but demanding concept: to achieve large loudspeakers performance from comparatively small enclosures. And these compact cabinets should be basically convenient in style, to integrate happily into home environments where space is at a premium.
●During the
Technical highlights
●The Active 1 has three drive units: two 150mm bass drivers, high frequency transducer employing diminishing
●Both bass/midrange drivers incorporate an advanced motor system with
●The totally rigid enclosure is built in a laminate of particle board and bitumous pads and is critically
Drive Units Three, vertically | Frequency Response | |
delay correction. |
| window. Bass control ‘+’: ±2dB 45Hz |
Bass/bass midrange transducers |
| to 18Hz |
Diaphragm: 150mm dia bextrene cone heavily | Power consumption | Off mode: 4W |
damped with pva compounds. |
| On mode: zero drive 120W |
Voice coil: edgewound ribbon on kapton former |
| full drive 400W |
giving safe operating temperatures up to 250˚C. | Dimensions | Height: 626mm. 860mm with stand |
High frequency transducer |
| Depth: 355mm. 400mm with grille |
Diaphragm:26mm dia. special polymide, laser |
| Width: 256mm |
optimised to give diminishing radiating area with | Net Weight | 30kg |
increasing frequency. | Finish | Black Ash, Natural Oak, Walnut |
|
| Limited edition: Special lacquered finish |
|
|
|
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks
acknowledged.
www.bwspeakers.com