Bowers & Wilkins Signature 7SE owner manual Signature7SE

I 8362

Drive units

Frequency response

Sensitivity

Nominal impedance

Crossover frequency

Recommended amplifier power

Frame size

Cut-out size without pre mount frame

Cut-out size with pre mount frame

Min depth required

Finishes

Pre-mount frame (optional)

Signature™7SE

1x 180mm (7in) Kevlar® mid/bass1x 25mm (1in) metal dome high-frequency

40Hz – 20kHz ±3dB

88dB spl (2.83V, 1m)

8Ω

3.5kHz

20W–150W continuous into 8Ω on unclipped programme.

Height:	373mm (14	3/4 in)
Width:	285mm (11	1
		/4 in)
Height:	330mm (13 in)
Width:	245mm (9 5/8 in)
Height:	346mm (13	5/8 in)
Width:		1
	257mm (10 /8 in)

102mm (4in) From wall surface

Semi-matt white suitable for customising or pre-painting

PMK™8

Kevlar is a registered trademark of DuPont.

B&W Loudspeakers Ltd. reserves the right to amend details of the specification without notice in line with technical developments.

Copyright © B&W Loudspeakers Ltd. Printed in England.

B&W Loudspeakers Ltd, Meadow Road, Worthing, BN11 2RX Tel: +44 (0) 1903 524801 Fax: +44 (0) 1903 524725

B&W Loudspeakers of America, 54 Concord Street, North Reading, MA 01864-2699, USA Tel: (1978) 664 2870 Fax: (1978) 664 4109

http://www.bwspeakers.com