COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
1 | Press MENU button and |
| POINT LEFT/RIGHT button(s) to move a red frame pointer to |
| SCREEN Menu icon. |
2 | Press POINT DOWN button and move a red frame pointer to the |
| function that you want to select and then press SELECT button. |
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is larger than screen size (1024 x 768), this projector enters “Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected,
A projected image can be also expanded by pressing D.ZOOM ▲ button on Remote Control Unit.
Digital Zoom –
When Digital zoom – is selected,
A projected image can be also compressed by pressing D.ZOOM ▼ button on Remote Control Unit.
To cancel Digital Zoom +/– mode, press any button except D.ZOOM
▲/▼, SELECT, POINT and LASER buttons.
SCREEN MENU
SCREEN Menu icon
Move the red frame to the function and press SELECT button.
NOTE
●This SCREEN Menu cannot be operated when “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P22).
●Wide cannot be selected when “720p (HDTV)” is selected on PC SYSTEM Menu (P22).
●True and Digital zoom +/– cannot be selected when “RGB” is selected on PC SYSTEM Menu (P22).
●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector.
●The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode.
●Panning function may not operate properly if the computer system prepared on PC ADJUST Menu is used.
29
