BOXLIGHT CP322ia Turning On The Power, Precautions, Turn on the projectors power, Control panel

TURNING ON THE POWER

Precautions

Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

			STANDBY/ON
VIDEO	RGB	SEARCH
ASPECT		AUTO	BLANK
MAGNIFY	HOME	PAGE UP	VOLUME
ON
	END	PAGE DOWN	MUTE
OFF
FREEZE		KEYSTONE

Control panel

LANP

TENP

POWER

STANDBY/ON INPUT KEYSTONE RESET

1Make sure that the power cord is firmly and correctly connected to the projector and outlet

	3
2	Turn on the projector's power
	Set the power switch to [ ] (ON). The projector will go

to STANDBY mode and the POWER indicator will light to solid orange.

power switch

POWER indicator

S

N

ONE RESET

KEYSTONE	PO			LANP
			NP
	RESET	WER	TE

NOTE Turn the power on/off in right order.

•Power on the projector before the computer or video tape recorder.

•Power off the projector after the computer or video tape recorder.

3Press the STANDBY/ON button (control panel or remote control)

•The projector begins warming up and the POWER indicator blinks green.

	• The POWER indicator stops blinking	STANDBY/ON
	and lights to solid green once the
	projector's power is completely on.
4	Remove the lens cap
	The picture is projected.

14