BOXLIGHT XP-5t manual Picture Position Adjustment, Computer Mode Auto Image Function

COMPUTER MODE

AUTO IMAGE FUNCTION

The Auto Image function is provided to automatically adjust

Fine sync, Total dots, and Picture Position for most computers.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select AUTO
	IMAGE	and press the SELECT button.
	Another dialog box AUTO IMAGE Menu will appear.
2	Move the arrow to an item that you want to adjust by pressing
	the POINT UP/DOWN button. Change the setting On or Off by

pressing the SELECT button.

Fine sync

Adjust the picture as necessary to eliminate flicker from the display.

This item can be adjusted manually. (Refer to page 26.)

Total dots

The number of the total dots in one horizontal period. This item can be adjusted manually. (Refer to page 26.)

			Starts the adjustment
			on the item set to "On".
		Position
	Adjustment of the position of the image. This item can be adjusted		Closes the AUTO IMAGE
	manually. (Refer to page 27.)
			FUNCTION Menu.
3		Move the arrow to “Go!” and press the SELECT button to start
		the Auto Image function.

This adjustment can be executed by pressing AUTO IMAGE button on the Remote Control Unit.

Stored Stores the On/Off setting of each item.

Go!	Starts the Auto Image Function.
Quit	Closes the AUTO IMAGE FUNCTION Menu.

Move the arrow to the item and then press the SELECT button.

NOTE : The Fine sync and the Total dots cannot be fully adjusted when “RGB,” “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P22 and 23).

The Fine sync, Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 26 to adjust "Fine sync" or "Total dots" and page 27 to adjust Picture Position.)

PICTURE POSITION ADJUSTMENT

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	POSITION	and press the SELECT button. The PICTURE
	POSITION dialog box will appear.
2	Move the image by pressing the POINT UP / DOWN / RIGHT /
	LEFT buttons.

To cancel PICTURE POSITION ADJUSTMENT, press any button except POINT buttons. To return to the position previously set, press NORMAL button.

PICTURE POSITION

dialog box

Press the POINT UP /

DOWN / RIGHT / LEFT buttons to move the image

27