PREPARATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE CABINET
PROJECTION LENS
ZOOM RING 
FOCUS RING
SPEAKER (Monaural)
LENS COVER
INFRARED
REMOTE RECEIVER
BACK OF THE CABINET
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS (Both sides and Rear)
This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover the vent slot.
● Keep sides and rear clear of any obstructions. Obstructions may block cooling air.
POWER CORD CONNECTOR
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.
●Do not put a flammable object near this vent.
● Keep the side grills at least 3’ (1m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area will become hot while the projector is used.
This projector detects the internal temperature and automatically controls the operating power of the Cooling Fans.
BOTTOM OF THE CABINET
LAMP COVER 
AIR INTAKE VENTS
AND AIR FILTERS
These Air Intake Vents should not be blocked.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
