BOXLIGHT XP-8T manual Computer Input, Selecting Input Source, Selecting Computer System, Auto

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit.

If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below).

INPUT button

Computer

Video

	MENU OPERATION
1	Press MENU button and ON-SCREEN MENU will appear. Press	INPUT MENU
	POINT LEFT/RIGHT button to move a red frame pointer to
	INPUT Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to
	Computer and then press SELECT button.

INPUT Menu icon

Move a pointer (red arrow) to Computer and press SELECT button.

SELECTING COMPUTER SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 23). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of the following messages.

Auto	When projector cannot recognize connected signal as PC PC SYSTEM MENU
	system provided in this projector, Auto PC Adjustment
	function operates to adjust projector and the message
	“Auto” is displayed on SYSTEM Menu icon. (Refer to
	P24.) When image is not provided properly, manual
	adjustment is required. (Refer to P25 and 26.)

––––There is no signal input from computer. Make sure the connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 39.)

SELECT COMPUTER SYSTEM MANUALLY

SYSTEM Menu icon Displays system being selected.

This projector automatically selects PC system among those provided PC SYSTEM MENU in this projector and PC system can be also selected manually.

1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT buttons to move a red frame pointer to PC
	SYSTEM Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to the
	system that you want to set, and then press SELECT button.

SYSTEM Menu icon

Displays system being selected.

The systems on this dialog box can be selected.

Custom Mode (1~5) set in PC ADJUST Menu. (P25, 26)

22