Aerada 1000/1100 SeriesInstallation
TROUBLESHOOTING
Problem | Possible Cause | Solution |
|
|
|
No water flow | Supply valves are closed | Open supply valves |
|
|
|
| Aerator is blocked or dirty | Clean or replace aerator (See "Care and Maintenance") |
|
|
|
| Inlet water line filter is dirty or | Clean or replace fi lter (See "Care and Maintenance") |
| blocked |
|
|
|
|
| Braided hose is kinked | Eliminate braided hose kink |
|
|
|
| No external water pressure | Check water pressure/Provide water pressure |
|
|
|
| Battery is drained (DC | Replace battery (See "Care and Maintenance") |
| faucets only) |
|
|
|
|
| Battery contacts are | Clean contacts or replace battery |
| corroded (DC faucets only) | (See "Care and Maintenance") |
|
|
|
| Reverse battery insertion | Insert battery correctly |
|
|
|
| Connector between | Plug connector |
| transformer and power |
|
| adapter unplugged (AC |
|
| faucets only) |
|
|
|
|
| Power adapter contacts are | Clean contacts |
| corroded (AC faucets only) |
|
|
|
|
| Connecting cable is kinked | Replace defective parts (See "Replacement Parts") |
| or broken (AC faucets only) |
|
|
|
|
| No external power supply | Check external power supply/Provide power supply |
| (AC faucets only) |
|
|
|
|
| Replace | |
| defective |
|
|
|
|
| Solenoid valve inoperable | Replace solenoid valve (See "Replacement Parts") |
|
|
|
| Faucet is in cleaning mode | Wait for cleaning mode to end (appr. 90 seconds) |
|
|
|
| Electronics module | Contact Bradley technical service or replace power adapter (See |
| inoperable | “Replacement Parts”) |
|
|
|
| Power adapter defective (AC | Contact Bradley technical service or replace power adapter (See |
| faucets only) | “Replacement Parts”) |
|
|
|
| Sensor distance is not | Reset sensor monitoring range |
| adjusted properly | Remove and |
|
| procedure (wait until water fl ow stops and LED switches off) |
|
|
|
| Infrared window sctatched | Clean window with smooth cloth |
| or dirty |
|
|
|
|
10 | 5/21/08 | Bradley Corporation • |
