Brainboxes BL-830, BL-819 manual Configuration by Menu, Configuration by Commands

9.1.2. Configuration by Menu

Select option 2 from the “Main Menu” menu to display the Bluetooth settings menu shown below left.

You should enter here the Bluetooth Address

(BD_ADDR) of the remote (server) device you wish to pair (in our case this is 000A-4F-00082D) followed by ENTER.

This should be in the same format as indicated on the products label (NAP-UAP-LAP, for those of you who know)

Press “Esc” to skip this section

Press C to select the client option. This setting is stored immediately and is not discarded upon a reboot. In fact it requires a re-boot in order to activate it.

Press “Esc” to skip this option

Re-boot (power cycle) your adapter. When the Client adapter is switched on, it will connect to the Server device you have entered in the menu above, assuming of course that the server device is also powered up. Remember of course that the factory shipped configuration of the adapters is “server” so only 1 device needs any modification in this respect

9.1.3. Configuration by Commands

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 34 of 41