Brainboxes BL-819, BL-830 Opening the Configuration Applications, Using the Configuration Wizard

3.3. Opening the Configuration Applications

After attaching your Adapter to an available COM port on your Computer, either start the application by double clicking the new application icon located on your desktop or go to “Start/All Programs/Brain Boxes Software/RS-232 Bluetooth Adapter Configuration Tools/RS-232 Bluetooth Adapter Configuration Utility”, as shown below. The Configuration Wizard is also opened in the same manner.

3.4. Using the Configuration Wizard

The Configuration Wizard is a tool that will guide you through all the necessary configuration options for configuring your Adapter for the first time. This section will give a brief overview of the Configuration Options on offer. Please see section 3.5. To move to the next page of the Configuration Wizard, click ‘Next’. At any time, to re-configure certain options, click the ‘Back’ button to return to the previous page.

Initially the Configuration Wizard will need to connect to the Adapter to configure it.

COM Port: Select the port number of the COM port to which you have attached your adapter. Select “Auto” if you don’t know the number and the utility will attempt to find the device for you.

Other Settings: Select the other parameters to match those that have been set on the adapter. If you don’t know them, select “auto” and the utility will attempt to find the device for you. The default parameters for the adapters are 115200 baud, No Parity and 1 Stop bit.

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 7 of 41