Braun 3470 manual How to epilate, Preparing the appliance, Leg epilation

•Insert the gel pack underneath the glove’s transparent foil. Use only with glove.

•Put transparent (cool) side of the glove on your leg.

•Start cooling for approx. 1/2 minute, longer if needed.

•Epilate the cooled skin area immedi- ately as described in section «C».

•Repeat cooling and epilating until completion.

•While epilating, please ensure your skin is dry.

Important: Apply cooling glove to the same area for no longer than 2 minutes. Keep away from sunlight. Do not use gel pack when damaged. Dispose of in household waste. Do not use if you are hypersensitive, allergic to the cold, or

if your skin suffers from sensory disturb- ances, when suffering from cardiac dis- eases or arterial circulatory disorders.

Preparing the appliance

•Before starting off, thoroughly clean

the epilation head you want to use (B or b).

•To remove the epilation head, press the release buttons 3 on the left and right and pull it off.

•Click the desired head into place:

–Choose the starter epilation head b if you are epilating for the first time or if you have very sensitive skin.

–Once your skin is used to epilation,

you may switch to the standard epilation head B which allows a more efficient and faster epilation thanks to its greater number of tweezers.

•Make sure that the 4-way moving pain softener is in place.

•Plug the cord connector 6 into the socket 5 and plug the transformer plug 7 into an electrical outlet.

C How to epilate

1To turn on the appliance, slide switch 4 to setting «2»

(«2» = normal speed, «1» = reduced speed).

2Rub your skin to lift short hairs. For optimum performance hold the appliance at a right angle (90°) against your skin. Guide it in a slow, continuous movement without pressure against the hair growth, in the direction of the switch. The SoftLift™ tips will make sure that even flat lying hair is lifted and removed thoroughly at the root.

As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimum results.

Both rollers of the 4-way moving pain softener should always be kept in contact with the skin, allowing the pulsating movements to stimulate and relax the skin for a gentler epilation.

3Leg epilation

Epilate your legs from the lower leg in an upward direction. When epilating behind the knee, keep the leg stretched out straight.

4Underarm and bikini line epilation Please be aware that especially at the beginning these areas are particularly sensitive to pain. With repeated usage the pain sensation will diminish. For more comfort, ensure that the hair is at the optimum length of 2–5 mm. Before epilating, thoroughly clean the respective area to remove residues (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions.

12