English

Thanks for purchasing this Multiquick/Minipimer accessory. In combination with your Multiquick/ Minipimer 7/5 motor part (a), this chopper accessory combines a jug blender and an ice crusher.

Caution

Please read the use instructions carefully and completely before using this accessory with the motor part of the basic unit.

The blades are very sharp! To avoid injuries, please handle blades with utmost care.

Always unplug the appliance when it is left unattended and before assembling, disassembling, cleaning and storing.

The appliance is constructed to process normal household quantities.

The jug (c) is not microwave-proof.

(a)Gear box/lid

(b)Blade

(c)Jug

(d)Anti-slip base/lid

(e)Ice blade

(f)Ice crusher insert

This accessory is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, almonds, prunes etc. It is also suited for chopping hard foods like parmesan cheese or chocolate.

For these goods, use the turbo switch.

N.B.: Do not chop extremely hard food, such as nutmeg, coffee beans and grains.

Furthermore, the accessory is suitable for a variety of other applications like shakes, drinks, purées, light doughs and ice crushing.

Before chopping ...

pre-cut meat, cheese, onions, garlic, carrots (see processing guide on page 2)

remove stalks from herbs, un-shell nuts

remove bones, tendons and gristle from meet.

For best results, please refer to the speed settings recommended in the processing guide.

Chopping

(see picture section A on page 2)

1.Carefully remove the plastic cover from the blade

(b). Caution: the blade is very sharp! Always hold it by the upper plastic part.

Press the blade onto the centre pin of the jug (c) until it locks. Always place the jug on the anti-slip base (d).

2.Place the food in the jug.

3.Put the gear box (a) on the jug.

4.Insert the motor part (A) into the gear box until it locks.

5.Press switch (B) or (C) to operate the chopper. During processing, hold the motor part with one hand and the jug with the other. When chopping hard foods, press down the motor part.

6.After use, press buttons to remove the motor part.

7.Then remove the gear box.

8.Carefully take out the blade.

9.Remove the processed food from the jug. The anti-slip base also serves as an airtight lid for the jug.

Other applications

Light dough (pancake batter)

First pour liquids into the jug, then add flour and finally eggs. Pressing the turbo switch, mix the batter until smooth.

Crushing ice

(see picture section B)

1.Place the ice crusher insert (f) into the jug. Ensure it fits properly.

2.Place the shaft of the ice blade (e) into the centre hole of the ice crusher insert and press it down.

3.Fill ice cubes into the ice crusher insert.

4.Fit the gear box on the jug.

5.Insert the motor part into the gear box until it locks.

6.Press the turbo switch until all ice cubes have been crushed. After use, press buttons to remove the motor part. Then remove gear box, ice blade and ice crusher insert.

7.Remove the crushed ice or simply fill your drink into the jug for serving at the table.

Alternative: First mix fruits in the jug with the chopper blade (b), filling it up to 0.5 litres maximum. Remove the blade and place the ice crusher insert into the jug in order to crush ice directly into the pureed fruits.

Cleaning

(see picture section C)

Clean the motor part with a damp cloth only. ⁄The gear box (a) may be rinsed under the tap, but do not immerse it in water. All other parts can be cleaned in the dishwasher.

However, after processing very salty food, you should rinse the blades right away.

Also, be careful not to use an overdose of cleaner or decalcifier in your dishwasher.

When processing foods with colour (e.g. carrots), the plastic parts of the appliance may become discoloured.

Wipe these parts with vegetable oil before placing them in the dishwasher.

3

Page 3
Image 3
Braun 4191 manual English, Chopping, Other applications, Crushing ice, Cleaning