Braun 8595 manual Description, Before shaving

Description

1.Low-voltage adapter

2.«start cleaning» button

3.Station-to-shaver connecting contacts

4.Station lift button for cartridge exchange

5.Display for cleaning programs

6.Display for cleaning fluid status

7.Station mains socket

8.Cleaning cartridge

9.Shaver foil protection cap

10.Shaver foil

11.Cutter block

12.Foil release buttons

13.Long hair trimmer

14.Shaver-to-station connecting contacts (shaver backside)

15.Switch

16.Shaver display

17.Info key

18.Pilot light

19.Shaver mains socket

Before shaving

If you wish, you may start shaving right away (if the shaver is charged, see section «Shaver display»). However, we recommend to follow the procedure described here:

•Using the low-voltage adapter (1), connect the mains socket of the Clean&Charge station (7) to the mains.

•Press the station lift button (4) to open the housing.

•Hold the cleaning cartridge (8) down on a flat, stable surface (e.g. table).

•Carefully remove the lid from the cartridge.

•Slide the cartridge into the base of the station as far as it will go.

•Slowly close the housing by pushing it down until it locks.

eco normal intensive

cartridg	e	full
		empty

1

2

5