Protection sleeve / holder for the shower
The bodycruZer comes with a protective cover that can also be used as a shower holder.
When used as a protective cover, insert the bodycruZer with the trimmer facing inwards. When using it as holder, insert the bodycruZer with the trimmer facing outwards (see picture 9).
Cleaning and maintenance
After each use, clean the bodycruZer.
Remove the trimming comb and brush it out.
You may also use the brush to clean the trimmer if it has been used for dry applications only.
If you have used the bodycruZer with shaving gel or foam, rinse it under hot, running water as shown in picture (f). Shake well to remove excess water and leave to dry.
Apply a drop of light machine oil onto the trimmer on a weekly basis.
Replacing the shaving system
The shaving system (3) has to be replaced when the green stripe becomes discoloured. Use Gillette Fusion cartridges only.
Extend the slider, press the release button (4) to eject the used shaving system.
Insert the appliance into the refill organizer to collect a new one (g).
In case the bodycruZer has dropped onto the shaving system, replace the shaving system for safety reasons.
Environmental notice
This product contains rechargeable batteries. In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection sites provided in your country.
Subject to change without notice
This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC.
9
