English
Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.
Carefully read the use instructions before use.
Important
•Plug your appliance into an alternating current (~) outlet only and make sure that your household voltage corresponds to the voltage marked on the hairdryer.
•
This appliance must never be used near
water (e.g. a filled wash basin, bathtub or shower). Do not allow the appliance to become wet.
•Always unplug after use. Even switched off the appliance presents a hazard when near water.
•For additional protection, it is advisable to install a residual current device (RCD) with a rated residual operating current not exceeding 30 mA in the electrical circuit of your bathroom. Ask your installer for advice.
•Care should be taken not to block the inlet and outlet grill when the appliance is switched on. If either grill becomes blocked, the appliance will automatically cut out. After cooling for a few minutes, it will switch back on automatically.
•Do not wrap the mains cord around the appli- ance. Regularly check the mains cord for wear or damage. The mains cord of the appliance may only be replaced by an authorised Braun Service Centre. Unqualified repair work can lead to extreme hazards for the user.
Description
1Switch
2 Filter
3 Cold shot button
4 Adapter
5 Volume attachment
6 Brush attachment
7 Air concentrator
Switch 1
0 = off
1 = gentle drying
2 = fast drying
Cold shot
To fix a style, shortly activate the cold shot button 3.
Easy-clean filter
Regularly wipe the filter 2 clean (C). For a thorough cleaning, remove the filter and clean it under running water.
Using the attachments
1 Attaching the adapter (A)
•Align the markings (a), attach the adapter to the hairdryer and turn it clockwise (b) until it snaps into place.
•To remove the adapter, turn it
2Connecting / changing the attachments (B)
• Choose an attachment (volume attachment or brush attachment).
• Slide the attachment onto the adapter upwards or downwards along the guiding grooves.
• To remove it, pull off the attachment upwards or downwards.
3Use
•For
3.1 Volume attachment
•Using the volume attachment 5, you can add volume and root lift to your hair.
•Place the volume attachment with the fingers against your head.
•Gently move the attachment back and forth over a small section until the hair moves up the fingers. Hold the attachment in place until the hair gets dry. Continue section by section.
3.2 Brush attachment
•The brush attachment 6 is ideal for untangling, slightly shaping and brushing your hair while drying, thus leaving your hair smoother and shinier.
Subject to change without notice.
This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
5
