Using the Multi-Bays in the Docking Station

Your computer includes the docking station that holds a 5.25" and a 3.5" device in the two multi-bays. Below is a listing of the device types you may install in your docking station.

The default system is purchased with CD/DVD-ROM and FDD devices.

5.25” Devices:

CD-ROM drive

DVD-ROM drive

CD-RW drive

3.50” Devices:

Zip (250Mb) drive

2nd HDD pack

FDD

Changing Devices

This section will discuss changing the 5.25" and 3.5" devices.

The multi-bay is the portion of the docking station where you change devices. See Figure 5 on page 6.

Changing a 5.25” Device

To change from one 5.25” device to another simply follow the steps below (Figure 27).

5.25" Device

Figure 27. Changing 5.25" Device

1.Turn off the system.

2.Detach the system from the docking station.

3.Slide the 5.25” multi-bay latch toward the middle of the multi-bay.

4.The device will pop out approximately 2cm.

Using the Multi-Bays in the Docking Station 33

Page 44
Image 44
Samsung N760FN2024/SEF manual Using the Multi-Bays in the Docking Station, Changing Devices, Changing a 5.25 Device