Using the Modem
Your Notebook computer will have a Modem/LAN installed in your computer.
Precautions Before Use
If you connect the modem to a digital phone line, the modem may be damaged.
DOS support
Windows Me does not support pure DOS mode and the modem does not support a DOS box in Windows. So you can not use a communication application using in DOS.
Using the Modem on a PBX system
If you use a simple terminal program:
Type the “ATX3&W” or “ATX3” command as an initialization command.
If you use a Windows Communication Program:
Follow the instructions below.
1.Click Start > Settings > Control Panel.
2.
icon.
3.Click Properties in the General tab section.
4.Check off “Wait for dial tone before dialing” check box in the Connection tab section.
5.Click OK to close the dialog box.
6.Click OK to close “Modem Properties” dialog box.
MODEM Notes:
1. In the US due to FCC limitations, speeds of 53kbps are the maximum permissible transmit power levels during download transmissions. Actual data speeds will vary depending on line conditions.
2.In order to use the 56K feature, be sure to check if the standards supported by the
3.If you use a PBX phone system, you can not connect using the 56K mode due to line loss.
28 Users Manual
