ATX4 | Dials after dial tone is detected |
ATZ | Initializes modem |
AT&F | Loads the factory default configuration (profile) |
AT&V | Shows current configuration |
AT&W | Saves user profile |
AT&Zn=x | Stores the dial string in modem memory (n=0~3, x=phone number) |
| e.g.) AT&Z0=1235678 |
| Automatically calls the stored phone number by using the following |
| command. |
| ATDTS0Recalls the stored phone number as AT&Z0 by tone dial |
| ATDPS0Recalls the stored phone number as AT&Z0 by pulse dial |
AT+MS=X | Sets protocol for modem connection |
| (X=V90, V34) |
| AT+MS=V90 (default setting) |
| Try to connect with V.90 (max 56 Kbps) |
| AT+MS=V34 |
| Try to connect with V.34 (max 33.6 Kbps) |
84 Users Manual
